VAN DEN HUL TEATRACK HYBRID

Lista Ofert

Opis

Podstawowe cechy: Długość: 1m stereo (prawy, lewy) Wtyki: brak (gołe kable) Specyfikacja techniczna: Cable Type: Screened 5 conductor Conductor Material: FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s) Design Purpose/ Application Area(s): Highest quality loudspeaker cable / Exotic DIY interconnect Eff. Conductor Ø/Eq. AWG No./Strands: Each signal lead: 1.97 mm² / ~AWG 14 / 98 Ground lead: 0.56 mm² / AWG 19.6 / 7 Screen: 4.45 mm² / AWG 10.7 / 252 External Diameter / -Dimensions: 11.5 mm. Resistance 20 °C/ 68 °F: Two red or blue signal leads combined: 1.4 Ohm/100 m. Central ground lead: 3.2 Ohm/100 m. Screen: 0.45 Ohm/100 m. Capacitance: 318 pF/m. Insulation / Dielectric Strength / Test Voltage: Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min. Connector Types Suitable: When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable): Our 5.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 8.3 mm. Ø cable entrance diameter BERRI Bus Connectors; Custom mountable on any length ordered; For termination of individual leads: Our 3.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 4.5 mm. Ø cable entrance diameter BERRI Bus Connectors or our DIY Screw-On Speaker Connectors; All custom mountable on any length ordered. Jacket Colours Available: Gold tone Remarks: Mounting: When twin lead wiring a loudspeaker, the two internal red leads should be combined to form the loudspeaker + connection. Likewise, the two blue leads should be combined to form the loudspeaker – connection. When bi-wiring or bi-amping a loudspeaker, the first red and blue conductor pair is used to connect one speaker section and the second red and blue conductor pair to connect the other speaker section. When ordered with connectors mounted, The INSPIRATION HYBRID comes ready made with a ground lead at each side of the cable: At the cable end located in the direction of the “van” side of the “van den Hul” cable printing (i.e. at the amplifier side), both the cable shield and the cable’s central ground lead are connected together and exit as a ground lead, which is to be connected to the power amplifier’s dedicated ground terminal (or chassis). If it is impossible to connect this ground lead to any ground terminal (or chassis screw) at the amplifier, it can be connected to the amplifier’s “–” (i.e. black) output terminal of the channel in question. At the cable end located in the direction of the “Hul” side of the “van den Hul” cable printing (i.e. at the loudspeaker side), the cable shield is left disconnected. Here only the cable’s central ground wire exits as a ground lead. If your loudspeakers are equipped with ground terminals, this ground lead should be connected to the speaker’s ground terminal of the channel in question. If your loudspeakers are not equipped with ground terminals, this ground lead should be left disconnected.

Rozwiń Zwiń

Specyfikacja

Podstawowe informacje

Marka	Van Den Hul
Rodzaj	Kable głośnikowe Wtyki

Techniczne

Dodatkowe cechy

Z miedzi beztlenowej

Opinie VAN DEN HUL TEATRACK HYBRID Pabianice

Na liście znajdują się opinie, które zostały zweryfikowane (potwierdzone zakupem) i oznaczone są one zielonym znakiem Zaufanych Opinii. Opinie niezweryfikowane nie posiadają wskazanego oznaczenia.

Ocena ogólna

4,5 na podstawie 3 opinie

x...k 08 października 2024
5

Opinia została napisana przez użytkownika, który kupił produkt.
Bardzo dobre kable

Rozwiń Zwiń
jakość

trwałość

wygląd
Użytkownik Ceneo 13 listopada 2019
4
4,0/5

Rozwiń Zwiń
Użytkownik Ceneo 26 września 2019
4,5
4,5/5

Rozwiń Zwiń